Varathane Gel Stain Colors

If you strip off the finish the base wood is something akin to popular. But dont understand why people would like the product. Seems like it dries to quick for a large table top. Does not penetrate and seems it would be more or a paint. So you would want 3 coats of polyurethane on top of it. many people don’t get the color the expect with weathered oak.

I would not say they are the same thing, but they both are a polymerized oil, and might even have a little tung oil in the mix. I like the MTOF better than Watco when I want an oil finish. take more coats to build up my standard finish, and took longer to dry. Please note that the VOC content has nothing to do with the overall durability of a product.

Should You Wear Gloves When Using A Bandsaw?

Since I poured concrete flooring and it is gray and my walls are repose gray, the bedrooms, where most of the doors are, I feel – need a wood stain to give the rooms warmth. What can be mixed with #2716 Dk Walnut penetrating stain, to bring out a touch of red. Using on pallet wood, probably pine as yellow seems prominent. We chose to experiment with this stain color because of its mid-range tint with red undertones. The pine board looked the least natural with this stain. Birch did surprisingly well and the oaks were naturals.

It’s a very subdued, earthy brown tone with less golden highlights than some of the similar Minwax colors. Lastly, we thought it would be beneficial to see all the same wood type with different stains in one picture. This will hopefully help you see how Pine, Birch, Poplar, White Oak and Red Oak’s undertones play with different stain undertones.

How To Remove Paint From Aluminum Boat

Also, keep a cabinet scraper handy, in case some bumps appear while applying on the sand layers. As stated above, Minwax can be in two forms, oil-based and water-based too. The properties and usage of both types of poly shades are different. Water-based minwax polyshade is durable and best for coatings.

Can you use it like a concealer for furniture? I stripped the polyurethane off and sanded it off… wow it was a mess and a lot of hard work. Minwax generally dries in 8 varathane vs minwax stain hours but often takes 2-3 days to cure enough before you can safely apply the 1st coat of poly. And, if it’s very humid and/or a dark color, it can take even longer.

Which Stain Is Better For Hardwood Floors

Will I need to apply another Polyshades coat without wiping it off? Can we apply a water-based finish to dry quickly and cover up the smell? Will time and air flow help the smell go away? ’ (We read that stains can emit fumes for up to months and years.) Anything will help! My husband and I are staining a dresser for our baby due in March. We used a minwax stain and applied the minwax pre stain conditioner prior to staining.

  • Minwax® helps you select the ideal stain color for your wood project.
  • After you pick your stain color, make sure to sand the wood well when preparing your project for stain!
  • Minwax is a brand that has been manufacturing wood preparation and finishing products for more than a century.
  • Only note that cleaning up an oil-based stain like this requires the use of a solvent, such as mineral spirits).
  • Oils and stains, on the other hand, are appropriate for interior woods that need less protection.
  • The smell is non-existent, when I put my nose to the can I can’t smell anything.
  • Varathane (Oil-based) requires the application of only a single coating as it is thicker and has a better quality.
  • I am using Varathane wiping stain and if you have a spot of glue or something you miss, you can sand it and reapply the stain.
  • I am happy with the minwax over the stain so far.

This stain is sold in 1- and 5-gallon jars, as outdoor projects are typically larger, and it covers around 125 square feet per gallon. This stain and sealer combo can be applied to all types of hard and soft wood, and it will help protect the material from mold, mildew, and ultraviolet rays. This wood stain and sealer allows you to color and protect exterior wood in just one step and provides a weatherproof finish. So for you, I suppose, the General Finishes Gel Stain will be the best solution since it’s well suited for hard-to-stain woods like pine.

No need to sand it and repaint all over again. My problem with Minwax is that, applied thinly enough to dry, it doesn’t stain very much and certainly cannot equate to the surface color I am attempting to restore. The table is now drying normally and not shiney wet look anymore. It was an easy fix that I am very grateful to you all for. Hey there, I have stained my hardwood floors with Low VOC Penofin Verde .

Small stores can’t compete with the big boxes, so they look for a source to private label a product for them. It may carry a lower price from the supplier since it doesn’t have to support the marketing costs associated with the brand name. I have been using Minwax for years; really for no other reason than convenience. I buy most of my “this type of Products” at Lowes. Couple of wks ago, I went to buy a pint of minwax cherry stain and they were out, forcing me to go to Home Depot. HD didn’t have minwax, only varethane, so I bought it.

Key Considerations For Choosing A Wood Stain

A standard application will usually dry within one hour after applying. You can expect to get great coloring from a single coat. This product works best with wood floors, indoor furniture, cabinets and more. This option by General Finishes is the most popular wood stain. It’s a heavy-bodied formula that only penetrates just below the surface of your projects. It is a gel stain that’s designed to reduce spillage and uneven coating.

It takes very long to dry and the oil based poly tends to show a yellowish layer when used on light colored surfaces. Water based poly dries more quickly than the oil based poly. Polyurethane is scratch proof as it penetrates deep into the wood and durable. I have an old 90s red oak dining table and I’d like to go for the PotteryBarn “Seadrift” color. I really would like to cool down the warm undertones some, and I am wondering- do you think more coats of the white would do that? Should I layer a bit of white and with a gray that I wipe off quickly?

Voc’s, Solid Content And Bona Products

Allows one to draw their own conclusions about the result one is trying to achieve. I selected the General Finishes stain for my red oak project. Looking forward to the results when stain arrives.

Water based finishes, for example, can retain the color of the stain for longer than oil-based. If fire safety is a big concern, it should be noted that water based polyurethane is less flammable than oil based. I’m using these french doors as an example but gel stains can be used on ANY existing finish. Kitchen cupboards, cabinets, previously stained furniture, factory finished, wood, veneer or laminate, and even previously painted finishes.

Our Favorite Light Wood Stain

The Wood Whisperer abides by word of mouth marketing standards and holds integrity in the highest regard. Should I ever be compensated to write, I will make full disclosure. I always give honest opinions, findings, and experiences on products. The views and opinions expressed on this blog are purely our own.

With sanding being the key factor in the equation would be the reason I linked the Bona sand and refinish video in which you host in this thread. For these an additional step between sanding and staining is recommended – applying a layer of a sealer. A lot of different things can be used as a sealer, but if you are dealing with one of these woods, you might want to buy a “sanding sealer” and follow the directions. Myself, I would probably use a Minwax stain, they’re pretty good. I’d probably seal with a water-based poly, or blonde shellac . You’ll definitely need two coats of sealer with a steel-wool rub in between, no matter what you choose.

Random Posts

Minwax offers a wide variety of products that are well suited to practically any kind of wood that lives in interiors. You can use them on furniture, cabinets, molding, floors, doors, and trim, for example. Additionally, Minwax’s products can be used on surfaces, whether they’re finished, unfinished, or bare wood. I tried the rich mahogany on an interior shelf of my china cabinet. The stain is lighter than the same stain on my test piece. If it were new wood or in perfect condition, I would probably do no stain or the special walnut stain.

Additionally, it can be used for applications beyond traditional wood finishing. It can be used on obtaining a wood grain appearance on steel doors as well as other projects. Oil based stains are somewhat more water resistant than the water based finishes. Due to this, by sprinkling a little water onto the stained area you can tell if the stain is water or oil based.

Construct a divider wall inside box with a small fan taped to a fitted opening. Set your project in tent with your back to fan. Naturally,a woodworker can build a nicer set up but I want to keep the in reach of an appartment balconey workshop. Wear clean clothing that isn’t shedding lint and dust.